Green Energy! Waste Plastic Pyrolysis to Furnace Oil Plant

1.100% waste recycling 2.40% oil,30%carbon black,15% steel wire ,10% value gas 3. high safety 4. fully burnt,no pollutants 1. Each set of equipment are composed by 7 systemA. Automatic feeding system,B. The furnace cracking systemC. Catalytic systemD. Cooling systemE. Hair oil recovery systemF .Safety systemG. Environmental protection Systems 2. Domestic pioneer of this technology1).In its key installment pyrolysis processor design.It has thoroughly overcome the disadvantages such as bottom partial being heated non-uniformity, easy to break, low output, short life and so on.2).Fast feed-in and discharge system. The highest feed-in quantity every 24 hour achieved 15 tons, Discharge for 300kg carbon black only needs 70 minutes.3).Highly effectively gas heating system. In the process of refining oil, after the gas is heated up to 150 , it will produce a large amount of unliquefied gas-CH4 ,,If those gases have been fully burning by the specific designed gas nozzle, they can produce a great amount of energy and economize resources.4).Dust removing system. It matches the bidirectional water impact type tornado dust removal room, and the rate of the flue dust catch is access than 95% . 3.Specification of 2012 Hot Sale Waste Plastic Pyrolysis Equipment 4.Final products

Waste tire/plastic pyrolysis machine
Crude oil	45%-55%
Carbon black	20%-25%
Steel wire	10%-15%
Gas	5%
Waste oil/Crude oil distillation machine
Fuel oil	90%

5. Working PeriodRaw material feeding -- 2 hours.2 hours after feeding, it begins to extract oil and lasts 10 hours.Slagging and steel wire discharge - --2 hoursReactor cooling - -1 hour 6. Flow Chart        

Green Energy! Waste Plastic Pyrolysis to Furnace Oil Plant